
As we so often like to inform you, all of your vintage gaming hardware is slowly but surely shuffling towards the grave.
As the old saying goes, everything put together falls apart, and systems like the SNES are now operating way beyond their intended lifespan. Sooner or later, things are going to fail (or, in the case of Nintendo's 16-bit system, speed up), and the CPU is one such component.
In fact, it's one of the hardest parts of the console to replace—it's not like you can ring up Rioch and order another 5A22. That's the dilemma that was faced by [leonllr] when they picked up a second-hand SNES and found that its CPU was faulty.
Finding a replacement was expensive, and [leonllr] didn't want one sourced from a perfectly good console, so the decision was made to build a replacement (thanks, Hackaday).
Here's what the developer had to say about the origins of the project:
A few weeks ago, I purchased my very own SNES console (as I've long been interested in the internal working of retro consoles), but sadly it was struck by the curse of a defectuous S-CPU revision A.
But when I searched for a replacement, the cheapest I could see was 50CHF (about 50$), and even then it's ripped away from a probably perfectly lively console.
So then I decided that I was going to try to fix that, using a FPGA.
Costing just $20, the ICE40HX8K FPGA is the perfect replacement for the existing CPU, and [leonllr] has even gone as far as to develop an installation method to fit the chip to a real SNES console. It runs a core which has been spun off from the SNESTANG project.
[leonllr]'s solution will ensure that SNES consoles are easy to repair moving forward and should ensure that the system's legacy extends even further into the future. The mod is entering its final stage, and testing will begin shortly. It is expected to cost around $45 to $55, and if you want one, you can register your interest here.
[source hackaday.com]
Comments 18
Love to hear it for those with their SNES still around (personally I'll stick to other solutions to play its games nowadays, but still)!
Resourceful and a development of the tech that’s been primarily used to load software libraries via flash memory, now also a bypass of sorts for the failing internals
wonderful news.
This is awesome! Dead custom chips seem to be the biggest hurdle for console longevity. Most other stuff that goes bad can be repaired.
While most people will go to emulation, keeping the actual systems alive for future generations to see the real thing will be huge for the hobby and the medium.
Hopefully something like this exists for other platforms as well but it has to be a good FPGA.
surely someone can build a replacement board, even if you have to transfer the cart slot into it, for very very cheap. The TANG fpga console has cores for the major 8 and 16 bit consoles and costs $69 for example
@city952 But the mainboard isn't the faulty part. Playing with as much of the original console intact as possible is the point to playing on original hardware.
Great news, keep this awesome system alive.
Love that people continue to make replacement solutions for retro consoles and computers.
The armSID, saved my breadbin C64, when the original SID died (which sadly will happen to all of them...), and sounds just as great as my old one did, when it still worked.
My Super Famicom still works great, but will definitely get a replacement, to have as a spare, in case it fails in a near future.
This is effing amazing. The CPU-A variant is failing in almost all of these systems. This is going to bring a ton of black screening SNES back to life.
Given its April 1st I'm always inclined to be skeptical but with only a cursory knowledge of how a CPU works that schematic in the link looked solid and was last updated well before April's foolishness, so here's hoping FPGA can indeed be a viable replacement for old SNES CPUs that have gone tits up.
About 25+ years too late. My original SNES died in the 90s.
@MegaManFan As the original creator I can confirm this is not an April fool but indeed a real project !
If you have any question about the project, please ask them here =)
@MeloMan but your SNES probably didn't die of a faulty CPU in the 90s. More than likely it blew the picofuse, which has been a readily available part for decades. Most people didn't know about that kinda stuff back then though, so I assume many of them went to landfill over a 50 cent component, sadly.
@RchUncleSkeleton I'm pretty sure you're right. Wish I knew then what I know now.
Sooooo... They weren't happy about buying a $50 replacement cpu so they decided to create their own cpu which they're intending on selling for "$45-$55"??
@Sethdedun I know this sounds kind of stupid, but 50$ was the cheapest I could find, most listing are about 100$ or more.
And to do that we're wasting console that are functional to fix other consoles, which is a bit stupid.
Also I checked and the original 50$ S-CPU I found on ebay is now out of stock
Leave A Comment
Hold on there, you need to login to post a comment...